Network

In theory all network switches that support fully QoS are supported by the Checkmarq VBX-Series for prioritized Voice transport. Furthermore, all network switches that support PoE can power the Endpoints certified by Checkmarq. The network switches below are fully tested and 100% compatible with the Checkmarq VBX-Series, and received the Certified for VBX-Series logo.

Cisco/Linksys 8-port 10/100 Ethernet Switch with PoE

Linksys One Ready, Secure, reliable, managed Ethernet switching with PoE
Provides IEEE 802.3af PoE power to IP phones, cameras, or APs
Dual gigabit uplinks provide increased bandwidth and redundancy
Maximum security and control of traffic with policing, shaping, ACLs, and QoS
Linksys One Ready - simple, automated installation with Linksys One Services Routers present.

The SFE1000P is an 8-port fully managed 10/100 Ethernet switch with two Gigabit copper or optical interfaces for connecting to a core switch. It is Linksys One Ready allowing it to be used in both Linksys One and non-Linksys One networks. The combination of its intelligence, small size and fanless design make it ideal for a small office, conference room or training room.

For Wireless or VoIP deployments, the SFE1000P supports IEEE802.3af standard for Power over Ethernet. With automatic load sensing, the power control circuitry automatically detects Power over Ethernet on end-device before providing power. (Power over Ethernet limited to the fixed 10/100 Base-T/TX ports.) The solution can provide maximum output power per PoE port up to 15.4W on 4 ports or 7.5W per PoE port on 8 ports simultaneously. Independent overload and short-circuit protection for each port. LED indicators for power status per PoE port.

With the enhanced quality of service (QoS) and traffic management features in the SFE1000P, voice and video data can be prioritized, ensuring clear and reliable voice communications. An intuitive, secure management interface enabling you to easily set up the QoS parameters, along with the other advance security and performance features, resulting in a better optimized, more secure network.

Linksys One integrates data networking and low-cost Voice-over-IP (VoIP) service with applications and other business services into one simple solution for small business. Because the SFE1000P is Linksys One Ready, it can be seamlessly integrated into a Linksys One data or data/voice network. Linksys One technology is automatic and self-configuring. Once connected, a Linksys One Service Router will discover the SFE1000P, automatically configure it and make it available to other users on the network.

Cisco/Linksys 24-Port Managed/Stackable Ethernet Switch with PoE

(24) 10/100 ports + 4 Gigabit ports
Fully resilient stacking provides optimized growth with simplified management
Provides IEEE 802.3af Power over Ethernet (PoE) power to IP phones, cameras, or APs
Maximum security and control of traffic with policing, shaping, ACLs, and QoS (Quality of Service)
Linksys One Ready - simple, automated installation with Linksys One Services Routers

The SFE2000P is optimized for maximizing the system availability with fully redundant Stacking, Redundant Power options, and Dual Images for resilient firmware upgrades. The SFE2000P is able to secure the network through IEEE 802.1Q VLANs, IEEE 802.1X port authentication, Access Control Lists (ACL), DOS Prevention, and MAC-based filtering. The enhanced QoS and traffic management features ensure clear and reliable voice and video communications

For Wireless or VoIP deployments, the SFE2000P supports the IEEE802.3af standard for Power over Ethernet (PoE). With automatic load sensing, the power control circuitry automatically detects PoE on the end-device before providing power. For safety, each port has independent overload and short-circuit protection, along with LED indicators for power status. A maximum of 15.4W is available on the FE ports for powering PoE enabled wireless AP or VoIP handsets, with a maximum per device PoE delivery of 185 Watts available for all ports.

SFE2000P switches provide an intuitive, secure management interface enabling you to better utilize the comprehensive feature-set of the SFE2000P, resulting in a better optimized, more secure network.

Linksys Business Series SFE and SGE Stackable switch products are Linksys One Ready. That means they include the necessary firmware to be seamlessly integrated into a Linksys One data or data/voice network. Once connected, a Linksys One Service Router will discover the SFE/SGE device, automatically configure it and make it available to other users on the network. Linksys One technology is automatic and self-configuring. When Linksys One Voice Gateways, IP Phones and other Linksys One peripherals are connected to a Linksys One Ready Ethernet switch ports, small businesses are ready to communicate in a matter of minutes.

Cisco/Linksys 48-port Managed/Stackable Ethernet Switch with PoE

Ethernet switch with 48-port 10/100, 2 10/100/1000 Copper ports, 2 SFP slots, and POE
Optimized for growing businesses with 4 Gig ports
Fully resilient stacking provides optimized growth with simplified management
Provides IEEE 802.3af PoE power to a phone, camera, or AP
Maximum security and control of traffic with policing, shaping, ACLs, and QoS

The SFE2010P is optimized for maximizing the system availability with fully redundant Stacking, Redundant Power options, and Dual Images for resilient firmware upgrades. The switch is able to secure the network through IEEE 802.1Q VLANs, IEEE 802.1X port authentication, Access Control Lists (ACL), DOS Prevention, and MAC-based filtering. The enhanced QoS and traffic management features ensure clear and reliable voice and video communications.

For Wireless or VoIP deployments, the SFE2010P supports the IEEE802.3af standard for Power over Ethernet (PoE). With automatic load sensing, the power control circuitry automatically detects PoE on the end-device before providing power. For safety, each port has independent overload and short-circuit protection, along with LED indicators for power status. 15 W of POE power is available on up to 24 of the FE ports for powering PoE enabled wireless AP or VoIP handsets, with a maximum per device PoE delivery of 360 Watt available for all ports.

The SFE2010P switches provide resilient stacking for up to 4 units or 192 ports. A stack of units is managed as a single switch with one Web Management interface to manage all the units. SFE2010P can coexist in a stack with other Linksys SFE2xxx/P 24-port and 48-port versions - SFE2000, SFE2000P, SFE2010, SFE2010P - for a maximum of 192 ports in a stack. The stacking functionality includes master/backup unit behavior, ring and chain architecture, hot insertion and removal of units.

The switches provide an intuitive, secure management interface enabling you to better utilize the comprehensive feature-set of the SFE2010P, resulting in a better optimized, more secure network.

Software running on the SFE2010P Ethernet Switch interacts with provisioning, management, and security software on the site's services router and interacts further upstream to the service provider. This interaction provides a simple, one-step installation and access to web-administered features for the administrator and users. Simple, affordable network operations throughout the network's lifetime are the result.